Developer Guide

Summary

This guide provides step-by-step instructions for setting up a development environment to install and run the Datum Cloud operators. It is targeted toward a technical audience familiar with Kubernetes, kubebuilder, and controller-runtime.

By following this guide, you will:

• Install and configure necessary development tools.
• Set up a kind cluster for access to a Kubernetes control plane.
• Install and run the Workload Operator, Network Services Operator, and Infra Provider GCP components.
• Configure and use Config Connector for managing GCP resources.
• Register a Location and create a sample Datum Workload.

Prerequisites

Ensure the following are installed and properly configured:

• Git
• Go 1.23 or greater
• Docker Desktop
• Kubebuilder
• Kind
• kubectl
• gcloud

Troubleshooting

If errors such as Command 'make' not found are encountered, reference the following guides for installing required build tools:

• Preparing Your Local Operating System
• Installing Required Software

Control Plane Setup

Create Kind Cluster

Create a kind cluster for development:

kind create cluster --name datum

Install Third Party Operators

cert-manager

Install cert-manager:

kubectl apply -f https://github.com/cert-manager/cert-manager/releases/latest/download/cert-manager.yaml

Ensure that cert-manager pods are running and ready:

kubectl wait -n cert-manager --for=condition=Ready pod --all

The output is similar to:

pod/cert-manager-b6fd485d9-2s78z condition met
pod/cert-manager-cainjector-dcc5966bc-ntbw4 condition met
pod/cert-manager-webhook-dfb76c7bd-vxgb8 condition met

Refer to the cert-manager installation guide for more details.

GCP Config Connector

GCP Config Connector is used to manage Google Cloud resources directly from Kubernetes. The infra-provider-gcp application integrates with GCP Config Connector to create and maintain resources in GCP based on Kubernetes custom resources.

Follow the installation guide, making sure to retain the service account credential saved to key.json, as this will be required later by infra-provider-gcp. The target Kubernetes cluster will be the kind cluster created in this guide.

Datum Operator Installation

Clone the following repositories into the same parent folder for ease of use:

• Workload Operator
• Network Services Operator
• Infra Provider GCP

Workload Operator

1. In a separate terminal, navigate to the cloned workload-operator repository:

   cd /path/to/workload-operator
   

2. Install CRDs:

   make install
   

3. Start the operator:

   make run
   

Network Services Operator

1. In a separate terminal, navigate to the cloned network-services-operator repository:

   cd /path/to/network-services-operator
   

2. Install CRDs:

   make install
   

3. Start the operator:

   make run
   

Infra Provider GCP

1. In a separate terminal, navigate to the cloned infra-provider-gcp repository:

   cd /path/to/infra-provider-gcp
   

2. Create an upstream.kubeconfig file pointing to the datum kind cluster. This extra kubeconfig file is required due to the operator’s need to orchestrate resources between multiple control planes. For development purposes, these can be the same endpoints.

   kind export kubeconfig --name datum --kubeconfig upstream.kubeconfig
   

3. Start the operator after ensuring that the GOOGLE_APPLICATION_CREDENTIALS environment variable is set to the path for the key saved while installing GCP Config Connector.

   export GOOGLE_APPLICATION_CREDENTIALS=/path/to/key.json
   

   make run
   

Create Datum Resources

Register a Self Managed Location

Before creating a workload, a Location must be registered.

Use the following example manifest to create a location which Datum’s control plane will be responsible for managing, replacing GCP_PROJECT_ID with your GCP project id:

apiVersion: networking.datumapis.com/v1alpha
kind: Location
metadata:
  name: my-gcp-us-south1-a
spec:
  locationClassName: self-managed
  topology:
    topology.datum.net/city-code: DFW
  provider:
    gcp:
      projectId: GCP_PROJECT_ID
      region: us-south1
      zone: us-south1-a

1. Replace topology.datum.net/city-code’s value (DFW) with the desired city code for your workloads.
2. Update the gcp provider settings to reflect your GCP project ID, desired region, and zone.

Apply the manifest:

kubectl apply -f <path-to-location-manifest>

List Locations:

kubectl get locations

NAME                 AGE
my-gcp-us-south1-a   5s

Create a Network

Before creating a workload, a Network must be created. You can use the following manifest to do this:

apiVersion: networking.datumapis.com/v1alpha
kind: Network
metadata:
  name: default
spec:
  ipam:
    mode: Auto

Apply the manifest:

kubectl apply -f <path-to-network-manifest>

List Networks:

kubectl get networks

NAME      AGE
default   5s

Create a Workload

Create a manifest for a sandbox based workload, for example:

apiVersion: compute.datumapis.com/v1alpha
kind: Workload
metadata:
  name: my-container-workload
spec:
  template:
    spec:
      runtime:
        resources:
          instanceType: datumcloud/d1-standard-2
        sandbox:
          containers:
            - name: httpbin
              image: mccutchen/go-httpbin
              ports:
                - name: http
                  port: 8080
      networkInterfaces:
        - network:
            name: default
          networkPolicy:
            ingress:
              - ports:
                - port: 8080
                from:
                  - ipBlock:
                      cidr: 0.0.0.0/0
  placements:
    - name: us
      cityCodes: ['DFW']
      scaleSettings:
        minReplicas: 1

Apply the manifest:

kubectl apply -f <path-to-workload-manifest>

Check the state of the workload

kubectl get workloads

The output is similar to:

NAME                    AGE   AVAILABLE   REASON
my-container-workload   9s    False       NoAvailablePlacements

The REASON field will be updated as the system progresses with attempting to satisfy the workload’s intent.

Check Workload Deployments

A Workload will result in one or more WorkloadDeployments being created, one for each unique CityCode per placement.

kubectl get workloaddeployments

The output is similar to:

NAME                           AGE   LOCATION NAMESPCE   LOCATION NAME        AVAILABLE   REASON
my-container-workload-us-dfw   58s   default             my-gcp-us-south1-a   False       LocationAssigned

Similar to workloads, the REASON field will be updated as the system progresses with attempting to satisfy the workload’s intent. In this case, the infra-provider-gcp operator is responsible for these actions.

Check Instances

kubectl -n default get instances -o wide

The output is similar to:

NAME                             AGE   AVAILABLE   REASON              NETWORK IP   EXTERNAL IP
my-container-workload-us-dfw-0   24s   True        InstanceIsRunning   10.128.0.2   34.174.154.114

Confirm that the go-httpbin application is running:

curl -s http://34.174.154.114:8080/uuid

{
  "uuid": "8244205b-403e-4472-8b91-728245e99029"
}

Delete the workload

Delete the workload when testing is complete:

kubectl delete workload my-container-workload